Warning:
1. This product does not come with other accessories by default, such as connectors, pipes, coolant, and power supply. If you need to purchase, please contact customer service to purchase separately!
2. It is necessary to ensure that the input of the module is the standard voltage, and the current is above 5A. It is strictly prohibited to use it beyond the voltage range. Overvoltage may damage the water pump and fan.
Model: SLMZ-LS-360S
Weight: 3.5kg
Size: 150 * 150 * 412mm
Interface: DC5.5 * 2.1mm
Thread: G1/4 thread * 4
Power: approximately 30W/35W
Capacity: 1800ml (measured manually with slight error)
Fan: 12cm 2500rpm*3

Water pump information: 12V water pump / 24V water pump
Rated current: 1.35A / 0.85A
Rated power: 16.2W / 20.5W
Rated voltage: 12V / DC24V
Water pump head: 7 meters / 9 meters
Water pump flow rate: 14L/Min / 18L/Min
Name: DC brushless water pump
Temperature: 0-60 ℃

Setting method
Speed alarm:
Long press to set, press to set the high and low speed alarm values (set range 0-8000L/min, set interval 500L/min), stop the operation for 3 seconds and automatically save it;
Temperature alarm:
Long press the to set, press the to set the high and low temperature alarm values (set the range to 5-100 ℃, set the interval to 1 ℃), stop the operation for 3 seconds and automatically save it;
Water level alarm:
If the water level inside the container is below the sensor, an alarm will be triggered. Press any key to stop the alarm. Press the up and down keys simultaneously to disable this function (please note that the water level below the sensor will not trigger an alarm after shielding, and this shielding function is generally applicable to version A). Press the ↑ and ↓ keys simultaneously to cancel the shielding function
Turn off the alarm beep:
/On the screen, the or button to turn off the alarm;